Kundan and Polki Jewellery Photography with AI: Keeping the Craft Intact
By the ORA Lab team · Updated 5 November 2026 · 8 min read
Key takeaways
- Kundan and polki are dense, handmade and irregular, which makes them the hardest test for any AI image tool. Generic models tend to flatten them into a generic ornate necklace.
- Polki stones are uncut diamonds with irregular faces; kundan sets stones in refined gold with foil behind them. Both glow rather than sparkle, so the light must be soft and warm.
- The back matters. Many pieces carry meenakari enamel on the reverse, and buyers want to see it, so photograph and show both sides.
- Source photos need to be sharper and more complete than for any other jewellery: front, back, side and close-ups of each cluster.
- Every stone, every enamel colour and every hanging pearl must match the real piece. Check cluster by cluster, never at a glance.
If you want to know whether an AI image tool can handle jewellery, do not test it with a plain gold chain. Test it with a kundan choker. Dozens of stones set close together in a handmade pattern, foil glowing behind each one, pearl drops along the edge and enamel work on the back: it is the hardest product in Indian jewellery to photograph, and the one where generic tools fail most visibly.
This guide covers what makes kundan and polki different, how to light and capture them, which scenes suit them, and the checks every image must pass before it goes live. For why this matters across the Indian market, see our jewellery photoshoot cost guide for India, which explains why the cheapest tools struggle exactly here.
What makes kundan and polki different
| Kundan | Polki | |
|---|---|---|
| What it is | A setting technique: stones set in highly refined gold, often with foil behind them | Uncut, unpolished diamonds in their natural shape |
| How it catches light | A warm glow from the foil behind the stone | A soft, uneven shimmer from irregular faces, not the sharp sparkle of a cut diamond |
| Typical detail | Dense stone patterns, pearl and bead hangings, meenakari on the back | Large irregular stones, often combined with kundan work and enamel |
| Where AI goes wrong | Stones merged, patterns simplified, foil glow turned into flat colour | Uncut stones redrawn as brilliant-cut diamonds with sharp sparkle |
Both are handmade, which means no two pieces are exactly alike. The small irregularities in stone shape and spacing are part of the value. A tool that tidies them into a perfect repeating pattern has not improved the image; it has shown a different piece.
Lighting: glow, not sparkle
- Use large, soft light sources. Small hard lights create hot spots on the gold and hide the foil glow.
- Keep the light warm. Kundan and polki are made to be seen in warm light, and cool light makes the gold look brassy.
- Light from slightly above and to one side, so each stone shows depth and the setting casts a gentle shadow.
- Avoid sparkle effects. Polki should shimmer softly; added star bursts make it look like cut diamonds.
- Control reflections with dark cards around the piece, so the gold shows form rather than the room around it.
Our guide to photographing reflective products with AI covers reflection control in more depth, and the lighting glossary explains the terms.
The source photos to capture
- 1.Front, laid flat on a neutral surface, with the piece in its natural shape and every hanging visible.
- 2.Back, showing the meenakari or finishing work in full.
- 3.Side profile, showing the depth of the settings and how the stones sit.
- 4.Close-ups of each section or cluster, sharp from edge to edge.
- 5.For sets: each piece alone, then the set together, so proportions between pieces are clear.
- 6.A note of real dimensions: necklace width and drop, earring length, tikka size.
Scenes that suit kundan and polki
| Use | Scene | Light |
|---|---|---|
| Product page | Deep red, emerald or ivory silk, or a velvet bust | Soft and warm, even across the piece |
| Bridal campaign | Heritage haveli interior, carved arches, brass lamps in soft focus | Warm side light, deep but not black shadows |
| Reverse detail | Cream silk or plain warm surface | Soft even light that shows enamel colour truly |
| Reception look | Polki with a modern saree or gown in an elegant interior | Slightly cooler, clean light |
| Social and Stories | Close crop of a worn choker and earrings | Warm window light, shallow depth of field |
For more scene wording, our 50 jewellery prompt ideas include heritage and bridal settings that suit this work. As always, the prompt should describe the scene only, never the piece.
The checks every image must pass
- Stone count and arrangement, cluster by cluster, against the source photo.
- Stone shape: polki stays irregular and uncut; no stone becomes a brilliant cut.
- Foil glow: kundan stones keep their warm glow rather than turning into flat coloured glass.
- Hangings: the same number of pearls or beads, in the same colours and order.
- Enamel: meenakari colours and patterns unchanged on the back.
- Metal: the gold tone stays the same as the real piece, not brighter or yellower.
- Scale: in worn images, the piece sits at its real size on the model.
These checks take time, and they should. A kundan set is often the most expensive piece a family buys for a wedding, and the buyer will compare your image with the piece in their hands. The full set of tests for any tool is in our product fidelity checklist.
Kundan and polki are where product accuracy stops being a feature and becomes the whole point. If you want to see how your most detailed piece holds up, and bring the kundan set you think no tool can handle.
Frequently asked questions
- Can AI photograph kundan and polki jewellery accurately?
- Only tools that work from your real product photos and keep the piece unchanged. Generic tools tend to merge stones, simplify patterns and redraw uncut polki as cut diamonds. Test any tool on your most detailed piece and check it cluster by cluster.
- What is the difference between kundan and polki?
- Kundan is a setting technique in which stones are set in highly refined gold, often with foil behind them. Polki refers to uncut, unpolished diamonds. The two are often combined in one piece, sometimes with meenakari enamel on the back.
- What lighting works best for kundan jewellery?
- Large, soft, warm light from slightly above and to one side. It brings out the foil glow and the depth of each setting without creating hot spots on the gold. Avoid added sparkle effects.
- Should I show the back of kundan jewellery in product photos?
- Yes. Many pieces carry meenakari enamel on the reverse, which is part of their value. Photograph it as carefully as the front and include it in the product page gallery.